Volume 2, Issue 6, November 2013, Page: 204-208
Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint
Anwar SNR, University of Mataram, NTB, Indonesia; University of Surrey, Guildford, GU2 7XH, UK; Ministry of Higher Education of Indonesia (DIKTI)
Crocombe AD, University of Surrey, Guildford, GU2 7XH, UK
Received: Sep. 19, 2013;       Published: Dec. 10, 2013
DOI: 10.11648/j.ijmsa.20130206.16      View  2672      Downloads  113
Abstract
Bonded aluminium single lap joints have been exposed to a fully reversed ageing environment (immersion followed by withdrawal both at 50oC) in both loaded and unloaded conditions with time dependent. Monitoring of these specimens and testing at key points on this reversed ageing environment has led to the stress rupture and moisture dependence of joint mechanical response included creep effect. Moisture cycling and stress influenced the tensile strength of the joints, with some apparent irreversible degradation. However, the effect of environmental exposure, time exposure, pre-treatment and constant stress was significant for the single lap joints damage.
Keywords
Adhesive Joint, Environment, Creep, Swelling, Damage
To cite this article
Anwar SNR, Crocombe AD, Simultaneously Effect of Envinronment and Sustained Load on the Degradation of Aluminium Bonded Joint, International Journal of Materials Science and Applications. Vol. 2, No. 6, 2013, pp. 204-208. doi: 10.11648/j.ijmsa.20130206.16
Reference
[1]
Crank, J., 1975, "The Mathematic of Diffusion", 2nd edition, Oxford University Press, London
[2]
Loh, WK., Crocombe, AD., Wahab, MA., Watts, JF, Ashcroft, IA., "The Effect of Moisture On The Failure Locus And Fracture Energy Of An Epoxy-Steel Interface", Journal of Adhesion Science Technology, Vol.16 (11) : 1407-1429, 2002
[3]
Liljedahl, CDM, Crocombe, AD., Wahab, MA., Ashcroft, IA., 2007, "Modelling The Environmental Degradation of Adhesively Bonded Aluminium And Composite Joints Using A CZM Approach", Elsevier International Journal of Adhesion & Adhesives
[4]
Mubashar, A., Aschroft, IA., Critchlow, GW., Crocombe, AD., 2009b, "Moisture AbsorptionDesorption Effects in Adhesive Joints", International Journals Adhesion and Adhesive 29 pp. 751-760
[5]
Frigione M., Lettieri M., "Procedures Conditioning the Absorption/Desorption Behaviour of Cold-Cured Epoxy Resins", Journal of Polymet Science Vol. 46, p.1320-1336, 2008
[6]
[6] McConnel BK., Pethrick RA., "Dielectric Studies of Water Absorption and Desorption in Epoxy Resins : Influence of Cure Process on Behaviour", Polymer International Journal, Vol. 57, p. 689-699, 2008
[7]
Kim & Brontman, 1971, 4th International Conference of Deformation, "Yield and Fracture of Polymers", Cambridge
[8]
Gilliat O., Broutman LJ., ASTM STP No. 685, p.61-83, 1978
[9]
Neumann S., Marom G., "Free-Volume Dependent Moisture Diffusion Under Stress in Composite Materials", Journal of Materials Science, Vol. 21, p. 26-30, 1986
[10]
Kasturiarachchi KA and Pritchard G., " Water Absorption of Glass/Epoxy Laminates Under Bending Stresses", Journals of Composites Vol. 14, p. 244-250, 1983
[11]
Knox, E.M. and Cowling, M.J., "A Rapid Durability Test Method for Adhesives", International Journal of Adhesion & Adhesives. Vol. 20, p. 201-208, 2000.
[12]
Roy S., Vengadassalam K., Wang Y, Park S and Liechti K.M., "Characterization and Modeling of Strain Assisted Diffusion in An Epoxy Adhesive Layer ",International Journal of Solids and Structures, Vol. 43, p. 27-52, 2006
[13]
Jurf & Vinson, 1985, Journal of Material Science, 20, 2979-2989
[14]
Cabanelas, J.C., Prolongo S.G., Serrano B., Bravo J., Baselga, 2003, Journal of material processing technology, In press
[15]
Adhesivestoolkit.com, Granta Park, Great Abington, Cambridge, 2010
Browse journals by subject