Volume 5, Issue 5, September 2016, Page: 194-201
Matrix Shear-Lag Parameter in a Shape Memory Alloy-Actuator-Reinforced Silicon Elastomer
Michael. O. Obaji, Department of Precision Machinery and Instrumentation, University of Science and Technology of China, Hefei, China
Received: Aug. 11, 2016;       Accepted: Aug. 22, 2016;       Published: Sep. 9, 2016
DOI: 10.11648/j.ijmsa.20160505.13      View  3153      Downloads  71
Abstract
The excellent qualities possessed by silicon elastomer when used in designing flexible parts of mechanical systems, make it imperative that we analyze its deformations and distributed axial forces in a matrix of shape memory alloy (SMA) fibers designed as possible appendages for gripping robots. The essence of these analyses is to determine the shear-lag parameter which has influence on the axial distributed forces proposed as a gauge for testing the structure in a high yield, high force and high strain mechanical environment. The insertion of SMA fibers in flexible rods cast using silicon elastomer results in the deformation of the host medium once shape recovery of the fiber occurs. This paper aims to analyze the mechanics of the said shape recovery in a modeled silicon elastomer rod with a single off-axis reinforced SMA actuator. The compressive force distribution mechanism and the bending moment caused by phase transformation in the design are determined using an approximate analytical model. The deformations on the structure proposed as an appendage on gripping robots were further analyzed by determining their equations of equilibrium, force factors and their comparative shear-lag models to be able to estimate the force distribution on the structure.
Keywords
SMA Actuator, Mechanics, Silicon Elastomer, Deformation, Soft Robots
To cite this article
Michael. O. Obaji, Matrix Shear-Lag Parameter in a Shape Memory Alloy-Actuator-Reinforced Silicon Elastomer, International Journal of Materials Science and Applications. Vol. 5, No. 5, 2016, pp. 194-201. doi: 10.11648/j.ijmsa.20160505.13
Copyright
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Budiansky, B., Hutchinson J. W. and Evans, A. G. (1986). “Matrix fracture in fiber-reinforced ceramics”. J. Mech. Phys. Solids 34 167-89.
[2]
K. Yang and C. L. Gu. “Design, drive and control of a novel SMA-actuated humanoid flexible gripper”, J. Mech, Sci. Technol., vol. 22, no. 5, pp. 895-904, May 2008.
[3]
Denny, M. W. 1988. “Biology and the Mechanics of the Wave-swept Environment”; Princeton University Press, Princeton, NJ.
[4]
J. Jayender, R. V. Patel, S. Nikumb, and M. Ostojic, “Modeling and Control of Shape Memory Alloy Actuators”, IEEE Trans. Control Syst. Technol., vol. 16, no. 2, pp. 279-287, Mar. 2008.
[5]
Toi, Y., Lee, J. B, and Taya, M. (2004). “Finite element analysis of superelastic, large deformation behavior of shape memory alloy helical springs” Comput. Struct. 82 1685–93.
[6]
Love, A. E. H. 1944. “A Treatise on the Mathematical Theory of Elasticity” (New York: Dover).
[7]
Wolfram Research, Inc., 1991 Mathematica, Version 2.0 (Wolfram Research, Inc., Champaign, Illinois).
[8]
Jackson, C. M., H. J. Wagner, and R. J. Wasilewski. “55-Nitinol- -The Alloy with a Memory: Its Physical Metallurgy, Properties, and Applications: A Report”. Washington: NASA, 1972.
[9]
Keller et al., “A Self-Healing Poly (dimethyl siloxane) Elastomer”; Advanced Functional Materials, v. 17, p. 2399–2404 (2007).
[10]
W. M. Kier and K. K. Smith, “Tongues, Tentacles, and Trunks: The Biomechanics of Movement in Muscular-hydrostats”, Zoological Journal of the Linnean Society, Vol. 83, pp. 307-324, 1985.
[11]
Michael. O. Obaji and Shiwu Zhang. “Investigation into the Force Distribution Mechanism of a Soft Robot Gripper Modeled for Picking Complex Objects Using Shape Memory Alloy Actuators”. Proceedings of the IEEE International Conference on Cybernetics, Intelligent Systems and Robotics, Automation & Mechatronics (CIS-RAM), Manila Philippines, Nov. 11-16, 2013, P. 7. ISBN: 978-1-4799-1198-1.
[12]
Tanaka, K., and Nagaki, S. (1982). “A thermo mechanical description of materials with internal variables in the process of phase Transitions”, Ing.-Arch. 51 287–99.
[13]
Online Journal on production of silicone elastomers. Accessed; April 2013 http://www.silicone.jp/e/catalog/pdf/rubber_e.pdf
[14]
Stockwell Elastomerics: “Silicone Sponge and Silicone Rubber Gaskets, Seals, Cushions, and Material”. http://www.stockwell.com/data-sheets/silicone-materials-guide.pdf: Accessed January 1, 2014.
[15]
O’Halloran A and O’Malley F (2004)., Materials and technologies for artificial muscle: a review for the mechatronic muscle project Topics in Bio-Mechanical Engineering ed P J Prendergast and P E McHugh pp 184–215.
Browse journals by subject