412 Editor(s) found
Editorial Member
Abdelrahman Elamin
Grand Egyptian Museum Conservation Center
Giza, Egypt
Editorial Member
Abdul Shakoor
Center for Advanced Materials, Qatar University
Doha, Qatar
Editorial Member
Abdul Manan
Department of Physics, University of Science and Technology Bannu
Khyber-Pakhtunkhwa, Pakistan
Editorial Member
Adel Wahba
Department of Engineering Physics and Mathematics, Faculty of Engineering, Tanta University
Tanta, Al-Gharbeya, Egypt
Editorial Member
Afsaneh Dorri Moghadam
Faculty of Materials Science and Engineering, University of Wisconsin-Milwaukee
USA
Editorial Member
Ahmad Keyvani
Department of Metallurgy and Materials Engineering, Faculty of Technology and Engineering, Shahrekord University
Shahrekord, Chaharmahal, Iran
Editorial Member
Ahmed Awadallah-F
Department of Chemical Engineering, College of Engineering, BCR Building, Qatar University
Doha, Egypt
Editorial Member
Ahmed Hassabo
National Research Centre, Textile Research Division, Pre-treatment and Finishing of Cellulosic Fibers Department, El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, (EGYPT)
Gizaa, Dokki, Egypt
Editorial Member
Ahmed El-Sayed Hassan Hammad
Physics Department, Faculty of Science, Zagazig University
Zagazig, Egypt
Editorial Member
Ajay Singh
Chemistry Food Technology and Environmental Science, Centre Superintendent-UIT, Uttaranchal University
Dehradun, India
Editorial Member
Ajaya Singh
Department of Chemistry, College with Potential for Excellence
Durg, Chhattisgarh, India
Editorial Member
Ala Qattawi
Department of Mechanical Engineering, University of California
Merced, California, USA
Editorial Member
Albert Ude
College of Engineering, Department of Mechanical, Energy and Industrial Engineering, Botswana International University of Science and Technology
Palapye, Botswana
Editorial Member
Alexander Straumal
Laboratory of Interface Boundaries in Metals, Institute of Solid State Physics RAS
Chernogolovka, Moscow District, Russia
Editorial Member
Alexander Tkach
Department of Materials and Ceramic Engineering, University of Aveiro
Aveiro, Portugal
Editorial Member
Alexander Onipko
Laboratory on Quantum Theory in Linköping (LQTL)
Linköping, Sweden
Editorial Member
Ali Özhan Akyüz
Mehmet Akif Ersoy University, Bucak Emin Gulmez Technical Sciences, Vocational Higher School
Burdur, Turkey
Editorial Member
Ali Ozer
Department of Metallurgical and Materials Engineering, Cumhuriyet University
Sivas, Merkez, Turkey
Editorial Member
Alok Kumar
Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Paso
USA
Editorial Member
Ameer Hamdi Hakeem AL-Ameedee
Department of Esthetic and Operative Dentistry, Faculty of Dentistry, University of Beirut Arab
Iraq
Editorial Member
Amina Mohamed
Pre-treatment and Finishing of Cellulosic Fibers Department, Textile Research Division, National Research Centre
Giza, Dokki, Egypt
Editorial Member
Ana Kalijadis
Department of Materials Science, Vinca Institute of Nuclear Sciences, Belgrade University
Belgrade, Serbia
Editorial Member
Instituto de Ciencia de Materiales de Barcelona
Bellaterra, Barcelona, Spain
Editorial Member
Anil Arya
Department of Physical Sciences, Central University of Punjab
Bathinda, Punjab, India
Editorial Member
Anjana Deva
Research and Development Centre for Iron and Steel, Steel Authority of India Limited
Ranchi, Jharkhand, India
Editorial Member
Aseel Kareem
Department of Physics, College of Science, University of Baghdad
Baghdad, Iraq
Editorial Member
Asghar Gholizadeh-Vayghan
Department of Civil Engineering, Sharif University of Technology
Tehran, Iran
Editorial Member
Ashok Kumar Srivastava
Department of Excellence in Material Science and Engineering, Faculty of Engineering, OP Jindal University
Raigarh, India
Editorial Member
Department of Physiology, Malla Reddy Institute of Medical Sciences
Hyderabad, Telangana, India
Editorial Member
Asif Alitahir
Environment and Sustainability Institute, College of Engineering, Mathematics and Physical Science, University of Exeter
UK
Editorial Member
Atanu Bag
School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU)
Suwon, Gyeonggi, South Korea
Editorial Member
Avinash Tekade
Department of Pharmaceutics, Rajarshi Shahu College of Pharmacy and Research
Pune, Maharashtra, India
Editorial Member
Aydin Mikail Ulubey
Department of Physics, Trakya University
Edirne, Turkey
Editorial Member
Azher Jameel
Department of Mechanical Engineering, Shri Mata Vaishno Devi University Katra, India
Jammu, Jammu and Kashmir, India
Editorial Member
Balaji N.S
Aksheyaa College of Engineering, Maduranthagam
Chennai, India
Editorial Member
Bandar Abdulaziz Al-Mangour
School of Engineering and Applied Sciences, Harvard University
USA
Editorial Member
Baoguo Han
School of Civil Engineering, Dalian University of Technology
Dalian, Liaoning, China
Editorial Member
Baoli Du
School of Physics and Electronic Information Engineering, Henan Polytechnic University
Jiaozuo, Henan, China
Editorial Member
Bekir Çevik
Department of Welding Technology, Düzce University
Düzce, Turkey
Editorial Member
Bhawana Joshi
Department of Applied Physics, Gautam Buddha University
Greater Noida, Uttar Pradesh, India
Editorial Member
Bornali Sarma
Department of Physics, School of Advanced Sciences, VIT University
India
Editorial Member
Burak Dikici
Department of Metallurgical and Materials Engineering, Ataturk University
Erzurum, Turkey
Editorial Member
Burak Dikici
Department of Metallurgical and Materials Engineering, Ataturk University
Erzurum, Turkey
Editorial Member
Changlei Xia
Department of Chemical and Environmental Engineering, University of Cincinnati
Cincinnati, Ohio, USA
Editorial Member
Changqing Hong
Center for Composite Materials and Structure, Harbin Institute of Technology
Harbin, Heilongjiang, China
Editorial Member
Chao Pu
AK Steel Holding Corporation
Dearborn, Michigan, USA
Editorial Member
Chengdong Li
School of Chemical and Material Engineering, Jiangnan University
Wuxi, Jiangsu, China
Editorial Member
Chiweshe Trevor
Analytical Chemistry Division, University of the Free State
Bloemfontein, South Africa
Editorial Member
School of Mechanical, Aerospace and Civil Engineering, University of Manchester
Manchester, UK
Editorial Member
Chuang Feng
School of Engineering, RMIT University
Melbourne, Australia
Editorial Member
Cihan Kurkcu
Department of Physics, Ahi Evran University
Kirsehir, Turkey
Editorial Member
Conghu Li
Department of Life Science, Anqing Normal University
Anqing, Anhui, China
Editorial Member
Dan Guo
Department of Radiation Chemistry and Material, Sichuan Institute of Atomic Energy
Chengdu, Sichuan, China
Editorial Member
Dayanand Mallapur
Department of Industrial and Production Engineering, Basaveshwar Engineering College
Bagalkot, India
Editorial Member
Deepak Rawtani
Department of Bio Nano Technology, Gujarat Forensic Sciences University
Gujarat, India
Editorial Member
Dr. Saptarshi Dhibar
Polymer Science Unit, Indian Association for the Cultivation of Science
Kolkata, India
Editorial Member
Dra. Ma.DelRocíoRedóndelaFuente
Center for Applied Science and Technological Development, National Autonomous University of Mexico
México, Mexico
Editorial Member
Edidiong Okon
School of Engineering, Robert Gordon University
Aberdeen, Scotland, UK
Editorial Member
School of Chemistry, Damghan University
Damghan, Semnan, Iran
Editorial Member
Ehsan Zeimaran
School of Engineering, Monash University
Bandar Sunway, Selangor, Malaysia
Editorial Member
Emas Agus Prastyo Wibowo
Department of Chemistry, Semarang State University
Semarang, Central Java, Indonesia
Editorial Member
Enwei Qin
Nuclear Power Research Institute
Suzhou, Jiangsu, China
Editorial Member
Era Jain
Biomedical Engineering Department, Saint Louis University
Saint Louis, USA
Editorial Member
Department of Medicin, Nutrition, University of Toronto
Ottawa, Ontario, Canada
Editorial Member
Ester Laguna-Gutierrez
Cellular Materials Laboratory (CellMat), University of Valladolid
Valladolid, Spain
Editorial Member
Evando Araujo
Department of Materials Science, Federal University of São Francisco Valley
Juazeiro, Bahia, Brazil
Editorial Member
F. Farjadian
Pharmaceutical Sciences Research Center, Shiraz University of Medical Sciences
Shiraz, Iran
Editorial Member
Fakhri Yousefi
Department of Science, Faculty of Chemistry, University of Yasouj
Yasouj, Iran
Editorial Member
Fareen Adeni Khaja
Department of Front End Products Group, Applied Materials
Santa Clara, California, USA
Editorial Member
Fatemeh Mostaghni
Department of Chemistry, Payam Noor University
Abadeh, Fars, Iran
Editorial Member
Fatma Ulusal
Department of Chemistry, Çukurova University
Adana, Turkey
Editorial Member
College of Materials and Chemical Engineering, Hainan University
Haikou, Hainan, China
Editorial Member
Francisco Torrens
Institute for Molecular Science, University of Valencia
València, Spain
Editorial Member
Francisco José Balta Calleja
Department of Physics, Institute for Structure of Matter
Madrid, Spain
Editorial Member
Franz Berge
Institute of Metal Forming, TU Bergakademie Freiberg
Freiberg, Saxony, Germany
Editorial Member
Ganapathi Prabhu Sai Balasubramanian
Institute of Physics and Astronomy (RAPh)
NITK Surathkal, Karnataka, India
Editorial Member
Ganesh K. C.
Department of Mechanical Engineering, University College of Engineering, Nagercoil
Nagercoil, Tamil Nadu, India
Editorial Member
Georgii Sokolsky
Department of Chemistry and Chemical Technology, National Aviation University
Kyiv, Ukraine
Editorial Member
Gholamali Farzi
Department of Material and Polymer Engineering, Faculty of Engineering, Hakim Sabzevari University
Sabzevar, Iran
Editorial Member
Girish Kumar
Department of Chemistry, School of Engineering and Technology, CMR University
Bangalore, Karnataka, India
Editorial Member
Gopal Shankar Krishnakumar
Department of Biotechnology, Bannari Amman Institute of Technology
Sathyamangalam, Tamil Nadu, India
Editorial Member
Gopinath Thirunavukarasu
Department of Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology
Howrah, West Bengal, India
Editorial Member
Govardhan Goud
B.C.E Shravanabelagola
Karnataka, India
Editorial Member
Gowhar Ahmad Naikoo
Department of Mathematics and Sciences, College of Arts and Applied Sciences (CAAS), Dhofar University
Salalah, Oman
Editorial Member
Graciela Analia Mansilla
Department of Metallurgical Engineering, Faculty of the National Technological, University of San Nicolas
Buenos Aires, Argentina
Editorial Member
Guowei Deng
College of Chemistry and Life Science, Institute of Functional Molecules, Chengdu Normal University
Chengdu, Sichuan, China
Editorial Member
Gurpreet Singh Kapur
Research and Development Centre, Indian Oil Corporation Limited
Haryana, India
Editorial Member
Hafiz M saleem iqbal
Materials Research and Development Group, National Space Agency of Pakistan
Pakistan
Editorial Member
Hafsa Jamshaid
Department of Knitting, National Textile University
Faisalabad, Punjab, Pakistan
Editorial Member
Hai-Zhi Song
Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China
Chengdu, Sichuan, China
Editorial Member
Hamdy Mohamed
Physics Department, Faculty of Science, Minia University
Minia, Egypt
Editorial Member
Hamid Fazelirad
Young Researchers and Elite Club, Islamic Azad University
Ardakan, Yazd, Iran
Editorial Member
Hang Luo
School of Chemistry and Chemical Engineering, Central South University
Changsha, Hunan, China
Editorial Member
Harby Ahmed
Conservation Department, Faculty of Archaeology, Cairo University
Giza, Orman, Egypt
Editorial Member
Heah Cheng Yong
Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)
Perlis, Malaysia
Editorial Member
Hidjan Adisucipto
Department of Civil Engineering, State Polytechinc of Jakarta
Depok, West Java, Indonesia
Editorial Member
Ilaria Cacciotti
Engineering Department, University of Rome "Niccolò Cusano"
Roma, Italy
Editorial Member
Imran Oral
Department of Physics Education, Necmettin Erbakan University
Konya, Meram, Turkey
Editorial Member
Department Mechanical Engineering, Transport and Aeronautics, Riga Technical University
Riga, Vidzeme, Latvia
Editorial Member
Iryna Ivanenko
Department of Inorganic Substances Technology, Water Treatment and General Chemical Engineering, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"
Kyiv, Ukraine
Editorial Member
Iulia Graur
Research and Development Centre for Thermoset Matrix Composites, "Dunărea de Jos" University of Galati
Galati, Romania
Editorial Member
Iulian Riposan
Department of Materials Science and Engineering, Politehnica University of Bucharest
Bucharest, Romania
Editorial Member
Jing Zhong
School of Civil Engineering, Harbin Institute of Technology
Harbin, Heilongjiang, China
Editorial Member
School of Materials Science and Engineering, Huazhong University of Science and Technology
Wuhan, Hubei Province, China
Editorial Member
College of Intelligent Manufacturing, Sichuan University of Arts and Science
Chengdu, Sichuan, China
Editorial Member
Jitendra Kumar Singh
Department of Architecture, Hanyang University
Ansan, Gyeonggi Province, South Korea
Editorial Member
School of Materials Science, Xi'an Polytechnic University
Xi'an, Shaanxi, China
Editorial Member
Junling Fan
Institute of Aircraft Strength Research
Xi'an, Shanxi, China
Editorial Member
K.B.R. Varma
Materials Research Centre, Institute of Science
Bangalore, India
Editorial Member
K.O. Low
Faculty of Engineering and Technology, Multimedia University
Melaka, Malaysia
Editorial Member
Kandi Kishore Kumar
Department of Mechanical Engineering, CVR College of Engineering
Telangana, India
Editorial Member
Kang Sun
Institute of Chemical Industry of Forest Products, Chinese Academy of Forest
Nan Jing, Jiang Su, China
Editorial Member
College of Information Science and Engineering, Huaqiao University
Xiamen, Fujian, China
Editorial Member
Kezhuan Gu
Department of Material Science and Engineering, McMaster University
Hamilton, Ontario, Canada
Editorial Member
Koppole Chandra Sekhar
Department of Physics, Central University of Tamil Nadu
Thiruvarur, Tamil Nadu, India
Editorial Member
Lei Yang
Faculty of vehicle engineering and mechanics, Dalian University of Technology
Dalian, Liaoning Province, China
Editorial Member
Libia Baena
Production Department, ITM Instituto Tecnológico Metropolitano
Medellin, Antioquia, Colombia
Editorial Member
Lifang Liu
College of Textiles, Donghua University
Shnghai, Shanghai, Christmas Island
Editorial Member
Liya Jia
Research and Development Department, Elkem Silicones Shanghai Co., Ltd.
Shanghai, China
Editorial Member
Shenzhen Institute, Peking University
Shenzhen, Guangdong, China
Editorial Member
Lucia Tsantilis
Department of Environment, Land and Infrastructures Engineering, Polytechnic University of Turin
Turin, Italy
Editorial Member
Bangladesh Atomic Energy Commission
Ashulia, Dhaka, Bangladesh
Editorial Member
Material Research Center, Institute of Modern Physics, Chinese Academy of Sciences
Lanzhou, Gansu, China
Editorial Member
Material Research Center, Institute of Modern Physics, Chinese Academy of Sciences
Lanzhou, Gansu, China
Editorial Member
Material Research Center, Institute of Modern Physics, Chinese Academy of Sciences
Lanzhou, Gansu, China
Editorial Member
Madeva Nagaral
Aircraft Research and Design Centre, Hindustan Aeronautics Limited
Karnataka, India
Editorial Member
Department of Physical Chemistry, Medical University of Gdańsk
Gdańsk, Pomorskie, Poland
Editorial Member
Magdi Elmessiry
Department of Textile Engineering, Faculty of Engineering, Alexandria University
Alexandria, Egypt
Editorial Member
Mahmoud Bubakir
Department of Mechanical and Industrial Engineering, Gharyan University
Gharyan, Libya
Editorial Member
Mahmoud Ebrahimi
Department of Mechanical Engineering, University of Maragheh
Maragheh, Iran
Editorial Member
Manas Ranjan Panigrahi
Department of Physics, Veer Surendra Sai University of Technology
India
Editorial Member
Mandava Venkata Basaveswara Rao
Department of Chemistry, Krishna University
India
Editorial Member
Manickam Ramesh
Department of Mechanical Engineering, KPR Institute of Engineering and Technology
Coimbatore, Tamilnadu, India
Editorial Member
Manikandan Vairavan
Department of Mechanical Engineering, Kalasalingam University
Tamil Nadu, India
Editorial Member
Manikandan Vairavan
Department of Mechanical Engineering, Kalasalingam University
Tamil Nadu, India
Editorial Member
Manish Kumar
Materials Research Division, CSIR-Central Scientific Instruments Organisation
Chandigarh, Chandigarh UT, India
Editorial Member
Manoj Kumar
Department of Mechanical Engineering, CGC-College of Engineering
Mohali, India
Editorial Member
Manoranjan Arakha
Department of Life Science, NIT Rourkela
Odisha, India
Editorial Member
Marcin Hojny
Department of Applied Computer Science and Modelling, AGH University of Science Technology
Krakow, Malopolska, Poland
Editorial Member
Marek Weglowski
Institute of Welding
Gliwice, Slaskie, Poland
Editorial Member
MAREK KOZLOWSKI
Department of Materials Science, D. Sc. Warsaw University of Technology
Nieznamierowice, Poland
Editorial Member
Maria Cristina dos Santos Ribeiro
Institute of Science and Innovation in Mechanical and Industrial Engineering
Porto, Portugal
Editorial Member
Marija Petkovic Benazzouz
Faculty of Physics, University of Belgrade
Belgrade, Serbia
Editorial Member
Mauro Giorcelli
Department of Applied Science and Technologies, Politecnico di Torino
Torino, Italy
Editorial Member
Mauro Zarrelli
Research National Council of Italy (CNR), Institute of Polymers, Composites and Biomaterials
Naples, Italy
Editorial Member
Malaysian Institute Chemical & Bioengineering Technology
Alor Gajah, Melaka, Malaysia
Editorial Member
Mehmet Ali Olgar
Department of Physics, Nigde Omer Halisdemir University
Nigde, Merkez, Turkey
Editorial Member
Mehrdad Aghaie-Khafri
Department of Materials Science and Engineering, K.N. Toosi University of Technology
Tehran, Iran
Editorial Member
Mehulkumar Sureshbhai Dave
Department of Physics, Natubhai V. Patel College of Pure and Applied Science College
India
Editorial Member
Meng Xianming
Automotive Engineering Research Institute, China Automotive Technology and Reseach Center
Tianjin, China
Editorial Member
Mercedes Castro Cabado
Institute of Ursa Insulation, S.A.
Madrid, Spain
Editorial Member
Meysam Ahangarkani
Department of Materials, Malek Ashtar University of Technology
Tehran, Iran
Editorial Member
Milan Kragovic
Institute for Technology of Nuclear and Other Mineral Raw Materials
Belgrade, Central Serbia, Serbia
Editorial Member
Mingxiao Shi
School of Materials Science and Engineering, Jiangsu University of Science and Technology
Zhenjiang, Jiangsu, China
Editorial Member
Mirela Maria Codescu
Department of Advanced Materials, R&D National Institute for Electrical Engineering ICPE-Advanced Research
Bucharest, Romania
Editorial Member
Mitun Das
Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras (IITM)
"Kolkata ", India
Editorial Member
Mohamad Alsaadi
Materials Engineering Department, University of Technology
Baghdad, Iraq
Editorial Member
Mohamed Gaber Moustafa
Physics Department, Faculty of Science, Al-Azhar University
Nasr City, Cairo, Egypt
Editorial Member
Mohammad Hasanzadeh
Drug Applied Research Center, Tabriz University of Medical Sciences
Tabriz, East Azerbaijan, Iran
Editorial Member
Mohammad Mahdavian
Surface Coatings and Corrosion Department, Institute for Color Science and Technology
Tehran, Iran
Editorial Member
Mohammad Mizanur Rahman Khan Khan
Department of Chemistry, Shahjalal University of Science and Technology
Sylhet, Bangladesh
Editorial Member
Mohammadreza Elahifard
Department of Chemical Engineering, Faculty of Engineering, Ardakan University
Iran
Editorial Member
Mohammadzadeh Roghayeh
Faculty of Engineering, Azarbaijan Shahid Madani University
Tabriz, Iran
Editorial Member
Mohammed Danish
Institute of Chemical and Bioengineering Technology, University of Kuala Lumpur
Malaysia
Editorial Member
Mohan Reddy Moola
Department of Mechanical Engineering, Curtin University
Miri, Sarawak, Malaysia
Editorial Member
Mohsen Mhadhbi
National Institute of Research and Physical-Chemical Analysis
Ariana, Ariana , Tunisia
Editorial Member
Mosbah ZIDANI
Department of Mechanical Engineering, Faculty of Science and Technology, Laboratory of Energy and Materials Engineering, University of Biskra
Biskra, Algeria
Editorial Member
Muhammad Atif Makhdoom
Department of Metallurgy and Materials Engineering, University of the Punjab Lahore
Pakistan
Editorial Member
Muhammad Naeem
Department of Physics, Women University of Azad Jammu and Kashmir
Bagh, Pakistan
Editorial Member
Muhammet Uludağ
Department of Metallurgical and Materials Engineering, Bursa Technical University
Bursa, Bursa Province, Turkey
Editorial Member
Mujibur Rahman
Department of Mechanical Engineering, Universiti Tenaga Nasional
Putrajaya, Selangor, Malaysia
Editorial Member
Mukul Dubey
Department of Electrical Engineering, South Dakota State University
Brookings, South Dakota, USA
Editorial Member
Murat Eskil
Department of Physics, Aksaray University
Aksaray, Turkey
Editorial Member
Mustafa AYDIN
Department of Mechanical Engineering, Dumlupınar University
Kütahya, Turkey
Editorial Member
Muthukumar Nagu
Research and Development Center, Saudi Aramco
Dhahran, Eastern, Saudi Arabia
Editorial Member
Myagmarjav Odsuren
Centre of Nuclear Reaction Data
Mongolia
Editorial Member
Nabeel A. Bakr
Department of Physics, College of Science, University of Diyala
Banisa'ad, Diyala, Iraq
Editorial Member
Nahed El Mahallawy
Department of Design and Production Engineering, Faculty of Engineering , Ain Shams University
Cairo, Egypt
Editorial Member
Naidu Seetala
Department of Mathematics and Physics, Grambling State University
Grambling, Louisiana, USA
Editorial Member
Department of Physic, Badji-Mokhtar University
Sidi Amar, Annaba, Algeria
Editorial Member
Technology Center, Soan Enterprises
Islamabad, Pakistan
Editorial Member
Neama Ahmed Sobhy Ahmed Reyad
Institute of Housing and Building National Research Center
Giza, Egypt
Editorial Member
NESRİN HORZUM POLAT
Department of Engineering Sciences, Faculty of Engineering and Architecture, İzmir Kâtip Çelebi University
Izmir, Turkey
Editorial Member
Nguyen Van Hung
Department of Physics, Hanoi University of Science
Hanoi, Vietnam
Editorial Member
Istanbul Technical University, Energy Institute
Istanbul, Maslak, Turkey
Editorial Member
Nima E. Gorji
School of Electronic Engineering, Dublin City University
Dublin, Ireland
Editorial Member
Nipin Kohli
Department of Physics, Guru Nanak Dev University
Amritsar, Punjab, India
Editorial Member
Nisreen Mohammed Nagi AL-Namnam
Faculty of Dentistry, University of Malaya
Kuala Lumpur, Malaysia
Editorial Member
Numan Arshid
Center for Ionics, Department of Physics, Faculty of Science, University Malaya
Kuala Lumpur, Malaysia
Editorial Member
Nurettin Çek
Department of Metallurgical and Materials Engineering, Engineering Faculty, Fırat University
Elazığ, Turkey
Editorial Member
Özdoğan Karaçali
Department of Mechanical Engineering, Istanbul University
Isatanbul, Avcılar, Turkey
Editorial Member
P. Santhana Gopala Krishnan
Central Institute of Plastics Engineering and Technology (CIPET)
India
Editorial Member
Pankaj Misra
Physical Sciences, Homi Bhabha National Institute
Indore, India
Editorial Member
Department of Civil Engineering, Krishnasamy College of Engineering and Technology.
Cuddalore, Tamilnadu, India
Editorial Member
Pavan Hiremath
Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education
Manipal, Karnataka, India
Editorial Member
Paweł Kossakowski
Department of Strength of Materials and Concrete Structures, Kielce University of Technology
Kielce, Świętokrzyskie, Poland
Editorial Member
Pedro Grima
Department of Physics, Universidad de Los Andes
Merida, Venezuela
Editorial Member
Philip Oladijo
Department of Chemical, Materials and Metallurgical Engineering, Botswana International University of Science and Technology
Palapye, Botswana
Editorial Member
Prashant P. Parhad
Department of Mechanical engineering, Kavikulguru Institute of Technology and Science
Ramtek, Dist.- Nagpur, India
Editorial Member
Qiangqiang Zhang
College of Civil Engineering and Mechanics, Lanzhou University
Lanzhou, Gansu, China
Editorial Member
Qing Qu
School of Chemical Science and Technology, Yunnan University
Kunming, Yunnan, China
Editorial Member
Qingshun Bai
School of Mechanical and Electrical Engineering, Harbin Institute of Technology
Harbin, Heilongjiang, China
Editorial Member
Quanling Yang
School of Materials Science and Engineering, Wuhan University of Technology
Wuhan, Hubei, China
Editorial Member
Ramon Pamies
Department of Material Engineering and Manufacturing, Technical University of Cartagena
Cartagena, Murcia, Spain
Editorial Member
Ravichandran Honnavally Kollarigowda
Department of Material Science Engineering, University of Illinois at Urbana–Champaign
Champaign, Illinois, USA
Editorial Member
Ravinder Kataria
Department of Mechanical Engineering, Lovely Professional University
Jalandhar, Punjab, India
Editorial Member
Reem Kamal Kamel Farag
Department of Polymer Chemistry, Petroleum Applications Division (EPRI)
Giza, Egypt
Editorial Member
Ricardo Branco
Department of Mechanical Engineering, Polytechnic Institute of Coimbra
Coimbra, Portugal
Editorial Member
Rifa El-Khozondar
Department of Physics, Al-Aqsa University
Gaza, Gaza Strip, Palestinian Territories
Editorial Member
Romila Manchanda
Department of Basic and Applied Sciences, Chemistry, K.R. Mangalam University
India
Editorial Member
Rongping Wang
Research Institute of Advanced Technology, Ningbo University
Ningbo, Zhejiang, China
Editorial Member
Rrahim Maksuti
Faculty of Applied Sciences, University of Tetova
Tetova, Macedonia
Editorial Member
Department of Medical Services and Techniques, Anadolu University /Yunus Emre Vocational School
Eskisehir, Turkey
Editorial Member
Sadu Venkatesu
Department of Atomic Energy, Homi Bhabha National Institute
Kalpakkam, Andhrapradesh, India
Editorial Member
Safaa Saud
Faculty of Information Science and Engineering, Management and Science University
Selangor, Shah Alam, Malaysia
Editorial Member
Safiullin Rinat Vladikovich
Institute of Problems of Metal Superplasticity, Russian Academy of Sciences
Ufa, Russia
Editorial Member
Said Ibrahim
Department of Chemistry, Assiut University
Assiut, Egypt
Editorial Member
Salih Akbudak
Department of Physics, Adıyaman University
Adıyaman, Turkey
Editorial Member
Sandip R. Sabale
Department of Chemistry, Jaysingpur College
Jaysingpur, Maharashtra, India
Editorial Member
Textile Institute of Center for Physical Sciences and Technology
Kaunas, Lithuania
Editorial Member
Sanjay Dhage
Center for Solar Energy Materials, International Advanced Research Center for Powder Metallurgy and New Materials (ARCI)
Hyderabad, India
Editorial Member
Sanjeev Gupta
Department of Physics and Electronics, Gujarat University
Ahmedabad, Gujarat, India
Editorial Member
Sanjeev Kumar
Institute of Material Science, Joining and Forming, Graz University of Technology
Graz, Styria, Austria
Editorial Member
Senthil Saravanan M S
Mechanical Engineering, UKF College of Engineering and Technology
Kollam, Kerala, India
Editorial Member
Sergey Shuklin
Marketing and technology transfer center, Udmurt state university
Izhevsk, Russia
Editorial Member
Serkan Apay
Departmant of Manufacturing Engineering, Faculty of Technology, Duzce University
Duzce, Konuralp, Turkey
Editorial Member
Shamini Janasekaran
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya
Kuala Lumpur, Malaysia
Editorial Member
Department of Polymer Nano-Science and Technology, Chonbuk National University
Jeonju, Baekje-Daero, South Korea
Editorial Member
SIVA PRASAD KONDAPALLI
Department of Mechanical Engineering, Anil Neerukonda Institute of Technology and Sciences
Visakhapatnam, Andhra Pradesh, India
Editorial Member
Subhendu Chakroborty
Department of Chemical and Materials Engineering, National Central University
Taoyuan, Taiwan
Editorial Member
Sudip Pandey
Department of Physics, Southern Illinois University
Carbondale, Illinois, USA
Editorial Member
Suhad Salman
Department of Mechanical Engineering, Faculty of Engineering, Mustansiriyah University
Baghdad, Iraq
Editorial Member
Suleyman Aydin
Department of Medical Biochemistry, Medical School, Firat University
Elazig, Turkey
Editorial Member
Suman Chowdhury
Department of Physics, Bangabasi College
Kolkata, West Bengal, India
Editorial Member
Sumit Kumar Gupta
Department of Physics, Parishkar College of Global Excellence
Jaipur, Rajasthan, India
Editorial Member
Surendranathan A O
Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka Surathkal
Karnataka, India
Editorial Member
Suresha Bheemappa
Department of Mechanical Engineering, The National Institute of Engineering
Mysuru, Karnataka, India
Editorial Member
Swathi Sunkara
Portland Technology Development Department, Intel
Hillsboro, Oregon, USA
Editorial Member
Department of Civil Engineering, Lambung Mangkurat University
Banjarmasin, South Kalimantan, Indonesia
Editorial Member
Syed Irfan Ali
School of Materials and Engineering, Tsinghua University
Pakistan
Editorial Member
T. Joseph Sahaya Anand
Faculty of Manufacturing Engineering, Technical University of Malaysia Melaka
Melaka, Malaysia
Editorial Member
Tamara Holjevac Grgurić
Department of Physical Metallurgy, Faculty of Metallurgy, University of Zagreb
Sisak, Zagreb, Croatia
Editorial Member
Tamer Hamouda
Textile Research Division, National Research Centre
Giza, Egypt
Editorial Member
Tata Lakshmi Narasimha Murthy
Chemistry Department, Gujarat State Petroleum Corporation Ltd
Kakinada, Andhra Pradesh, India
Editorial Member
Thippaiah Demappa
Department of Polymer Science, University of Mysore
Mysore, Karnataka, India
Editorial Member
Ti Jun Chen
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology
Lanzhou, Gansu, China
Editorial Member
Tingkai Zhao
School of Materials Science and Engineering, Northwestern Polytechnical University
Xi'an, Shaanxi, China
Editorial Member
Casting Department, Metal Industries Research and Development Centre
Kaohsiung, Taiwan
Editorial Member
Urvashi Verma
School of Technology and Sciences, A. P. Goyal Shimla University
Shimla, Himachal Pradesh, India
Editorial Member
Usman Saeed
Department of Chemical and Materials Engineering, Faculty of Engineering, King Abdulaziz University
Jeddah, Saudi Arabia
Editorial Member
V. Suresh
Holy Mary Institute of Technology and Science
India
Editorial Member
Vahid Babaahmadi
Department of Textile Engineering, Amirkabir University of Technology (AUT)
Tehran, Iran
Editorial Member
Veer Veer
National Physical Laboratory
New Delhi, Delhi, India
Editorial Member
Vincenzo Guarino
Institute of Polymers, Composites and Biomaterials (IPCB), National Research Council of Italy
Naples, Italy
Editorial Member
Virender Singh
Department of Electronic Science, Kurukshetra University
Kurukshetra, Haryana, India
Editorial Member
Department of Industrial Safety, University of Civil Protection of the Ministry of Emergency Situations of Belarus
Minsk, Belarus
Editorial Member
Volodymyr Fediv
Department of biological physics and medical informatics, Bukovinian State Medical University
Chernivtsi, Ukraine
Editorial Member
Wael Darwish
Polymers and Pigments, National Research Centre
Dokki, Giza, Egypt
Editorial Member
Wang Liran
Kirchhoff-Institute for Physics, University of Heidelberg
Germany
Editorial Member
Wei Shi
National Energy Technology Laboratory, University of Pittsburgh
Pittsburgh, USA
Editorial Member
Weiming Yang
School of Mechanics and Civil Engineering, Institute of Massive Amorphous Metal Science, China University of Mining and Technology
Xuzhou, Jiangsu, China
Editorial Member
Department of Mechanical Engineering and Materials Science, Yale University
USA
Editorial Member
Xi Zhao
Department of Civil Engineering, West Virginia State University
West Virginia, USA
Editorial Member
Xiang Ma
Department of Industrial Process Technology, Sintef Materials and Chemistry
Oslo, Norway
Editorial Member
Xiang Ge
School of Mechanical Engineering, Tianjin University
Tianjin, China
Editorial Member
Xiangjun Xu
School of Material Science and Engineering, Yangtze Normal University
Chongqing, China
Editorial Member
Xiaodong Zhou
Department of Chemical Engineering, East China University of Science and Technology
Shanghai, China
Editorial Member
Xiaojian Mao
Shanghai Institute of Ceramics
Shanghai, China
Editorial Member
Yang Yunfeng
School of Science, North University of China
Taiyuan, Shanxi, China
Editorial Member
Yanling Yang
Department of Materials, Shaanxi University
Xi'an, Shaanxi, China
Editorial Member
Yasin Göktürk Yildiz
Department of Physics and Electronics-Automation, Kırıkkale University
Kırıkkale, Turkey
Editorial Member
Yehia Hassanean
Department of Civil Engineering, Assiut University
Assiut, Egypt
Editorial Member
Department of Chemical and Biomolecular Engineering, University of Connecticut
USA
Editorial Member
Yogesh Sonvane
Department of Applied Physics, Sardar Vallabhbhai National Institute of Technology
Surat, Gujarat, India
Editorial Member
Yong Sheng
School of Civil Engineering, University of Leeds
Leeds, West Yorkshire, UK
Editorial Member
Yongjin Zou
Department of Materials Science and Engineering, Guilin University of Electronic Technology
Guilin, Guangxi, China
Editorial Member
Youliang He
Canmet Materials, Natural Resources Canada
Hamilton, Ontario, Canada
Editorial Member
Yue Zhao
School of Electronic Information and Electrical Engineering, Shanghai Jiaotong University
Shanghai, China
Editorial Member
Yun-Ming Liew
School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)
Kangar, Perlis, Malaysia
Editorial Member
Zahra Ghassemi
Department of Chemical Engineering, University of Maryland Baltimore County
Baltimore, Maryland, USA
Editorial Member
Ze Wang
School of Materials Engineering, Jiangsu University of Technology
Jiangsu, China
Editorial Member
Zegao Wang
Interdisciplinary Nanoscience Center, Aarhus University
Aarhus, Other, Denmark
Editorial Member
Zhaopeng Xu
Department of Optoelectronic Engineering, School of Information Science and Engineering
China
Editorial Member
Zhenghui Wang
Department of Otolaryngology, the Second Hospital of Xi'an Jiaotong University
Xi'an, Shanxi, China
Editorial Member
Zhihua Zhang
School of Transportation, Wuhan University of Technology
Wuhan, Hubei, China
Editorial Member
Zhilin Liu
College of Mechanical and Electrical Engineering, Central South University
Changsha, Hunan, China
Editorial Member
Zina Al Shadidi
Department of Physics, Aden University
Aden, Yemen
Editorial Member
Zong-Ping Yu
Science and Technology Centre of Mingda
Suzhou, Jiangsu, China
Editorial Member
Zoran Glavas
Faculty of Metallurgy, University of Zagreb
Sisak, Croatia
Editorial Member
Zubair Ahmad
Center for Advanced Materials (CAM), Qatar University
Doha, Qatar
Browse journals by subject